Redefining Industrial Laser Welding and Cleaning Discover What's Possible

We Bought a Thunder Laser Nova Plus 35. Here's What It Actually Cost—and What It Can't Cut

Published Monday 16th of November 2026 by Jane Smith

Short answer: for our 12-person custom furniture and millwork shop, the Thunder Laser Nova Plus 35 was a sound mid-range CO2 purchase. But it cost us $7,800 to get cutting, not the $6,150 on the spec sheet. And it cannot cut thick carbon fiber, metal, or glass—no matter what a YouTube comment thread tells you.

We run a shop in the Pacific Northwest. In Q2 2024, we needed a laser that could keep up with custom signage, engraved drawer fronts, and the occasional acrylic jig. We compared three machines over five weeks using a TCO spreadsheet I built after getting burned on a freight surcharge in 2021. The Nova Plus 35 won on price-to-capability. But the margin was thinner than the brochure suggested.

Here's the honest read: what we paid, what we tested, and the jobs that still go out the door to a CNC shop down the road.

Why this machine—and why trust my numbers

I'm the procurement manager at a 12-person custom woodworking company. I've managed our equipment budget—roughly $65,000 annually across tools, consumables, and service contracts—for six years. Every invoice gets logged. Every overrun gets a note in the spreadsheet. In 2021, a vendor padded a $4,200 machine order with $900 in "handling fees" buried in the quote's fine print. That mistake cost me a quarterly budget review. It hasn't happened since.

For the laser, we compared a used Epilog from a regional dealer, an Omtech of similar wattage, and the Thunder Laser Nova Plus 35. The Omtech was $700 cheaper. The Epilog had a local service network but was five years old. We went with Thunder. Two reasons. First, Thunder USA's support line—we called twice before buying and waited less than four minutes each time. Second, the sales rep told us what the machine couldn't do.

Specifically: I asked about cutting 5mm carbon fiber sheet. His response: "You can, but you'll hate the edge. If that's a regular job, put the money toward a fiber laser or a CNC router." I don't hear that from vendors often. A supplier who flags the limits of their own product is easier to trust with the rest of the order.

The real TCO: where the $6,150 spec sheet ends

The machine was $6,150 (July 2024, before freight). That includes the 65W CO2 tube, the bed, and basic accessories. Here's what the spec sheet doesn't show:

  • Chiller: $420. Don't skimp. I tried a cheaper alternative—it started leaking in month three. Replaced it with a proper Thunder-spec chiller and the leak stopped.
  • Exhaust fan: $380. Adequate for wood and acrylic. Borderline for carbon fiber.
  • Rotary attachment: $310. We use it for cylindrical wood parts and tumbler engraving. Worth it for our workflow.
  • Spare parts (lenses, belts, focus gauge): $270. You will use these. Not a question of if.
  • Freight and liftgate: $270. Nobody tells you the liftgate is extra until the truck is at your dock.

Startup total: $7,800. That's 27% over the sticker. Run rate is about $40 a month in electricity and roughly $180 in consumables in our first full year. So budget $8,500 for year one and you'll be close.

I signed the purchase order and immediately second-guessed. What if the Omtech's identical specs meant identical output for $700 less? The two weeks until delivery were stressful. It relaxed on day one of installation—the techs had the machine cutting a test grid within three hours, and by end of week we'd run 200 engraved cutting boards with no misfires. That's when I stopped checking the Omtech spec sheet.

What it cuts (and what it doesn't)

Wood: this is the reason we bought it

Plywood, hardwood, MDF—all solid. We cut 1/4" plywood at about 100 inches per minute with clean edges. For a woodworking laser cutter, it handles 90% of what our shop needs day to day. But here's a note for shops considering this for production: the bed size (around 900 × 600 mm) limits nesting efficiency on cabinet doors. If you're cutting full sheets, this isn't your machine—look at the Nova 63 or a CNC router.

Glass: engrave yes, cut no

Laser engraving glass works well. We etch frosted logos on glassware and glass panels for custom signage. Run times are 30–40 seconds per piece. Consistent.

Cutting glass is a different job entirely. We tried it once on 3mm sheet. The thermal stress cracked the glass along the cut path, and the debris clouded a lens. That was a $40 sheet plus a $180 lens replacement. One attempt was enough. Glass cutting stays outsourced to a waterjet shop. If a customer asks "can you laser cut glass?" the honest answer is: engrave, yes. Cut, no. Not on this machine.

Carbon fiber: engraved fine, cut is a mess

Laser engraving carbon fiber works. The laser marks the surface, and for serial numbers or logos on thin panels, it's serviceable. Cutting is where it falls apart.

We tested 3mm carbon fiber sheet. First, the cut edge was frayed and charred—the laser burns the polymer matrix faster than it vaporizes the fibers. Second, the smoke. Carbon fiber laser cutting releases thermal degradation products including carbon monoxide and hydrogen cyanide, per OSHA guidance on composite materials. Our $380 exhaust fan handled wood dust fine; for carbon fiber, it was the bare minimum. The shop smelled like burnt epoxy for two days.

I had been warned about this. A fabricator friend told me to skip carbon fiber on a CO2 laser. I tried anyway because a customer had a rush order. That job cost us a $45 sheet and a full afternoon of sanding an edge that still didn't look right. It went to a local CNC shop for $65 per part. Clean edge. Lesson learned: for carbon fiber cutting, pay the specialist.

When this is the wrong machine

I've put maybe 80 hours on the Nova Plus 35. It's a good machine within its lane. Here's when it's the wrong choice:

  • You cut metal regularly. CO2 lasers don't touch metal. You need fiber. We later bought a small Thunder fiber marker for metal tags—that's a separate $3,000+ budget line.
  • You cut carbon fiber above 1.5mm as a core job. Buy a CNC router. Cheaper edges, cleaner cuts, no toxic smoke management headaches.
  • You cut thick glass (6mm+) or need clean glass cuts. Outsourcing to a waterjet or glass shop is more economical than trying to make this work.
  • Your workspace is tight. The chiller and exhaust take up about 3 feet of floor space behind the machine. Plan for that before the delivery truck arrives.

What it does well: wood, acrylic, glass engraving, thin carbon fiber marking, and small-batch production of engraved parts. That covers most of what a custom furniture shop needs.

Support matters more than the spec sheet

In month four, the chiller alarm went off on a Friday afternoon. We called Thunder USA's support line—the US-based number, not the overseas one—and a technician walked us through a reset in under two hours. No parts. No escalation. The issue was a sensor calibration. He also mentioned that if the alarm recurred, they'd ship a replacement sensor at no charge. It didn't recur.

That matters for TCO. In 2021, a different vendor's support line put us on hold for a week and then told us to source the part ourselves. That $900 mistake is why I now factor support response time into every equipment decision. A machine that goes down for a week costs more than a $400 price difference.

One more mistake worth mentioning: I pieced together the chiller setup instead of buying Thunder's bundled kit. Saved $400 upfront. The off-brand chiller leaked. The replacement cost $420. That's the cost controller's trap—sometimes the cheap option is just the expensive one with a delay.

Bottom line: the Nova Plus 35 handles wood, acrylic, and glass engraving without drama. It marks carbon fiber. It does not cut thick carbon fiber or glass—no matter what the machine's spec sheet implies. If your shop's core work is wood and acrylic, this is a solid, budget-conscious choice. If you need carbon fiber cutting, put the money toward a CNC or a fiber laser. An honest machine that knows its limits is easier to budget for than one that pretends to do everything.

Share this article:
Jane Smith

Jane Smith

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Leave a Reply

Your email address will not be published. Required fields are marked